Configure smart card software through the Internet Services Interface
To enable and configure the Smart Card, do the following:
- Open a Web browser and enter the URL http://<MFP IP address> in the Address field.
- Select the Properties tab, and log in with User ID and Password if prompted. The Extensible Service Setup screen displays.
- In the left pane, click the Security folder, then the Authentication subfolder, and then Setup.
- On the Xerox Access Setup page, click the Edit button to change the Authentication method.
-
On the Authentication, Authorization and Personalization page, do the
following:
- Select SmartCards from the Authentication method on the machine’s touch interface list.
- Select User Name/Password Validated Remotely on the Network from the Alternate authentication method on the machine’s touch interface (Touch UI) list.
- Select User Name/Password Validated Locally on the Xerox Machine from the Authentication method on the machine’s web user interface (Web UI) list.
- Select Locally on the Xerox Machine (Internal Database) from the Authorization information is stored list.
-
Click Save to apply the changes.
A list of configuration settings appears at the bottom of the Xerox Access Setup page. Click Edit to configure any settings that are marked in red text as Required; Not Configured.