Configure an Auto Extract Locator
Use the procedure in this topic to configure an Auto Extract Locator.
Before you can configure an Auto Extract Locator verify that the following steps are complete:
-
Open the
Auto Extract Locator
Properties.
The properties for the Auto Extract Locator are displayed.
-
On the
General tab, use the
Add,
Delete,
Up, and
Down buttons and the following settings to add subfields and configure this
locator method.
Setting
Description
Subfield Name
The name of the subfield.
This name cannot contain spaces.
Description
This column contains a list of description for the subfield. If there is no description for a subfield then the field name is used. This is not ideal in most situations. For the best results, provide a description.
If the description is longer than a short sentence, select Edit to open the Description for Subfield window that has a large text box to edit the description. Once finished, click OK to return to the Auto Extract Locator properties window.
One or more subfields are added to the list.
-
Optional. Use the
Search field to filter the list of subfields.
This is helpful if you need to edit a field and you have many subfields.
- Optional. Double-click on any field to edit the Subfield Name or Description.
-
On the
Settings tab, configure the following:
Setting
Description
Some values located in table
Select if some values are in a table. (Default: Cleared)
Number of pages
This setting restricts the number of pages that are processed in a document. (Default: 10)
This also restricts the number of pages that are recognized. If you have a 50-page document and the value for this setting is set to 15, OCR is performed for the first 15 pages only.
The more pages processed increases the cost due to the higher consumption of volume licenses.
-
In the
Document pane, open a test document.
The selected test document is displayed in the Document Viewer.
-
In the locator properties window, select
Test.
The Test tab is displayed with the results from the locator for each subfield. The fields are also highlighted on the document.
- Optional. Test again using other documents.
- Click Close to save the changes to the locator.
-
Assign a field to a locator manually or use the Create and Assign Fields button to create fields automatically.