Register Documents activity: Barcode
This tab is available when configuring the Register Documents activity in the Process Designer. Use this tab to configure barcodes that can be used to print headers.
Click to create a barcode. Click one of the barcodes in the table in order to configure it in the right part of the tab.
The configuration is spread over two sub-tabs ( and ), which are described below.
Barcode details
The basic properties of the barcode are configured here:
Type a name for the barcode. Use this name to refer to this barcode when configuring headers. | |
Select the barcode type. |
Barcode fields
The elements of the barcode are created here.
Click to create a new element and specify these settings:
Type the name of the element. The name can be selected freely and is only symbolic. | |
Indicates at which position of the barcode this element is to be located. | |
The length of the
element. If there are more than the specified number of characters,
they are cut off from the left side. If there are not enough characters,
missing characters are replaced by adding zeros ()
to the left side of the existing value until it is long enough.
| |
| Select this option if the element is to get a constant value. |
The constant value of the element. | |
Select the document type and field name of the field from whose content the element is to be generated. |
Example:Register Documents activity: Header