Tungsten Capture Network Server (KCN Server) support

Tungsten Capture Network Server (KCN Server) adds Internet and intranet processing capabilities to Tungsten Transformation. With this capability, workstations can be connected to a central site through the Internet (or an intranet) to assist in the validation process. Batches can be scanned at a remote site, and then uploaded to the central site only for validation and verification.

As KCN Server is fully supported by Tungsten Transformation - Server you only have to run Tungsten Transformation - Knowledge Base Learning Server at the same site as the Server.

Note that the Copy project during publish setting from the Extended Synchronization Settings window must be selected for a batch class to be able to use Tungsten Transformation at remote site. If the setting is not enabled and a user sends a batch to the remote site for validation or verification, the following error is displayed, "Failed to load project, because: Invalid file path "C:\<file path>\*.fpr"."

If a batch class is first used when the Copy project during publish setting is enabled and then you choose to clear this setting, the project information is still retained. You are still able to use Tungsten Transformation at remote site and no error is displayed.

For further information about KCN Server see your Tungsten Capture documentation.