AutoThreshold

Eilocal.ini

[SCSIOptions]

This flag sets the threshold mode of your scanner:

• Automatic threshold: The threshold level is automatically decided while the scanner is reading.
• Dynamic threshold: The threshold level is dynamically decided while the scanner is reading.

Please refer to your scanner manual for more information about your scanner’s threshold functions.

• 0 (disabled – default)
• Values from 1-5 enable the Dynamic threshold mode. 1 is lightest, 5 is darkest.
• Values from 6-8 enable the Automatic threshold mode:

6 = Dark, 7 = Normal, 8 = Light