Add and OmniPage zone recognition profile

Use the procedure in this topic to add an OmniPage zone recognition profile.

This recognition profile has several unique settings related to the OmniPage recognition engine.

Procedure
  1. On the Project tab, in the Configuration group, select Project Settings icon Project Settings.
  2. Select the Recognition tab to view the recognition settings.
  3. Select the Add icon Zone Profile button.

    A properties window is displayed.

  4. From the Zone Recognition Method, select OmniPage 2025.1.

    The properties displayed on the window automatically update to the selected recognition method.

  5. In the Languages list, select one or more languages that your documents will use.

    This list enables you to select one or more languages from a comprehensive list of available languages. You can combine any languages. The English language only is selected by default.

    As you select additional languages, the language count in the header increases. Not all languages are visible and this ensures that you are aware that some languages lower down in the list are selected.

    If you have purchased the Asian Plus OCR add-on, additional languages are supported.

  6. In the General Settings group, configure the following settings:

    Setting

    Description

    Character Type

    You can filter the type of extraction used for a zone by selecting one of the following:

    • All. (Default: Selected)

    • Numeric.

    • Alphabetic.

    Recognition Mode

    Select the from the following values:

    Fast:

    Choose this value to prioritize speed of recognition over the recognition accuracy. If you choose this value, the recognition process takes less time, but the overall recognition accuracy may decrease.

    Balanced:

    Choose this value to balance the priority of the recognition accuracy with the speed of recognition.

    Accurate:

    Choose this value if you want to prioritize the recognition accuracy over the speed of recognition. If you choose this value, the recognition process takes longer.

    MRZ Mode

    When selected, a specialized recognition engine processes the zone for MRZ text and the Print Type is set to OCR-B automatically. This is because OCR-B is the font used by MRZ.

    Any non-MRZ text in this zone is likely to have low recognition accuracy. Because of this, if you want to recognize other non-MRZ text on the document, create a new zone and then use another zone profile to ensure the best recognition possible.

    Case Conversion

    Available when the Character Type setting has a value of All or Alphanumeric. If the value is set to Numeric, this setting is disabled.

    This setting to convert the case of recognized text is not supported for Asian languages.

    Select from one of the following values.

    Auto Case:

    Select when the case of the text in a zone is a mix of upper or lower case. No case conversion is applied.

    (Default: Selected)
    Small Case:

    Converts the recognized text in a zone to lower case.

    Capital Case:

    Converts the recognized text in a zone to upper case or capital letters.

    Prohibited Characters

    This is a non-delimited list of characters that should not be found in a zone. Prohibited characters are applied after the case conversion is applied and the characters are case sensitive. If one of these characters is encountered, it is assumed that a mistake exists in the recognition results, and the character is replaced with a ^ character. If OCR Substitution is defined for the mistaken character, its alternative is used instead. All characters entered are literal, meaning that ranges are not supported.

    For example, if you enter "Apf" for the Prohibited Characters setting, the characters "A", "p", and "f" are prohibited.

    If you enter "A-F", the characters "A" and "F" are prohibited, as well as the "-" hyphen character. To prohibit an entire range, enter each character of that range.

    Additional Characters

    Add a list of characters that are accepted in addition to the selected language. This is a comma-separated list.

    For example, if you have content printed in the MICR E-13B font and are using the OmniPage recognition engine, add '⑆', '⑈', '⑇' and '⑉' as additional characters. If these symbols are not added as additional characters, they are not included in the recognition result.

    Similarly, if your language is set to English and some characters with accents or diacritical marks are not recognized as expected, add them to the list of additional characters.

  7. In the Printer Type group, select the types of print or fonts to expect. Select one or more of the following printer types:
    • Auto. (Default: Selected)

    • Machine Print.

    • Handprint.

    • OCR-A.

    • OCR-B.

    • Dot 9 Matrix.

    • Dot 24 Matrix.

    • MICR CMC-7.

    • MICR E-13B.

  8. In the Dictionaries group, configure the following settings:

    Setting

    Description

    Language dictionary

    Runs spell checking during recognition for all of the following languages.

    User dictionary

    Specify your own dictionary that is used to aid spell checking during recognition. It is important to know that a misspelled word in the recognition results is not always replaced with a corresponding entry from a user dictionary. (Default: None)

    Format the dictionary so there is a single word per line in the dictionary file.

    Once selected, browse to select a dictionary.

    User dictionaries are not supported for the Asian Plus OCR add-on languages.

    Business terms dictionary

    Uses a dictionary and then select a business terms dictionary from the list. This dictionary can improve spell checking during recognition using the contents of the selected dictionary. The following dictionaries containing business terms are available. If there is not a suitable setting here, use the User dictionary setting above and specify your own list of terms. (Default: None)

  9. Optional. Rename the new profile so it has a descriptive name.
  10. Optional. Select OK to close the Project Settings window.
  11. Save the changes to your project.