Enable paragraph detection

Use the procedure in this topic to enable paragraph detection for your project.

In order to detect paragraphs for use in the Classification Locator or by script, it is necessary to enable paragraph detection.

Procedure
  1. On the Project tab, in the Configuration group, select Project Settings icon Project Settings.
  2. Select the Recognition tab to view the recognition settings.
  3. On the right-hand side, select Paragraph Detection.

    The Paragraph Detection Settings window is displayed.

  4. On the Paragraph Detection Settings configure the following settings.

    Setting

    Description

    Execute paragraph detection during recognition

    Paragraph detection is performed during recognition. This is related to the Classification Locator and assumes that you have a project configured to classify specific paragraphs based on content.

    Sensitivity group

    Vertical spacing

    Use the slider to select how sensitive you want vertical spacing to affect paragraph detection. (Default: 1.0)

    As you increase this value, the line spacing in a detected paragraph decreases. Lowering the sensitivity enables the detection of paragraphs with larger line spacing.

    This is similar to when a word processing application has its line spacing set to 1.

    Horizontal spacing

    Use the slider to select how sensitive you want horizontal spacing to affect paragraph detection. (Default: 1.0)

    As you increase this value, the space between detected columns decreases. Lowering the sensitivity enables the detection of columns with larger spaces between them.

    Indentation

    Use the slider to select how sensitive you want indentation spacing to affect paragraph detection. (Default: 1.0)

    As you increase this value, the indentation size of a detected paragraph decreases. Lowering this sensitivity enables the detection of columns with larger indentations.

    This is similar to when a word processing application has its paragraph indentation set to Tab.

  5. Select OK to save your settings.

    Your changes are saved and the Paragraph Detection Settings window closes.

  6. Optional. Select Close to close the Project Settings window.