Configure extraction online learning

Use the procedure in this topic to configure extraction online learning.

If you want to improve your extraction results even while your project is in production, use extraction online learning.

Documents are collected during production so you should see results in subsequent batches without any changes to the project itself.

Since the documents are collected during production, a large number of accumulated documents can adversely affect project performance. For the best results, ensure that you follow the project life cycle recommendations to store your training documents in the most efficient manner.

Before you begin

Before you can configure extraction online learning, verify that you have already enabled online learning.

Procedure
  1. On the Project tab, in the Configuration group, select Project Settings icon Project Settings.
  2. On the General tab, in the Online Learning, select Advanced.

    The Advanced Online Learning Options window is displayed.

  3. In the General tab, select a value for Group by field.

    Select from the list the field value you want to use to tag the group to facilitate sorts and filtering. For example, you may use the name of a supplier as the group value. The value of this field is saved in an additional data field. (Default: Classification Result)

  4. In the General Settings group, select Use Extraction Online Learning

    The Extraction Online Learning Settings group is enabled.

  5. In the Extraction Online Learning Settings group, configure the following settings.

    This is available only for projects created using the Extraction Group or Shared templates.

    Setting

    Description

    Maximum documents stored for import

    Enter a number between 100 and 20,000 to limit the number of documents to store for import. (Default: 2000)

    Use dynamic Knowledge Base during extraction

    If this setting is enabled, a specific dynamic knowledge base is created by the system task for the documents marked for Extraction Online Learning, and this dynamic knowledge base is used next time extraction is performed. (Default: Selected)

    When disabled, the project administration has to import and review the documents returned from online learning and update the project before any improvements are made.

    Automatic training after Validation

    Automatically flags a document for Extraction Online Learning. When the document is flagged it can be imported to improve the project. (Default: Cleared)

    If the Use dynamic Knowledge Base during extraction setting is selected a flagged document is added to the dynamic specific knowledge base and can be used during extraction processing.

    However, you have to define fields in the field details window that are monitored for flagging by selecting the Monitor for automatic learning setting. You can only monitor fields that are assigned to a trainable locator field. A document is used for Extraction Online Learning when the confidence of an extracted field is below a certain confidence level or field coordinates were changed during production.

  6. When finished, select OK.

    The Advanced Online Learning Options window is closed and your changes are saved.

  7. Optional. Select OK to close the Project Settings window.
  8. Save the changes to your project.