Add zones with the Zone Wizard

Use the procedure in this topic to add zones using the Zone Wizard.

If you are setting up an Advanced Zone Locator and have a documents with many pieces of data that are located in the same position across document of the same type, you can use the Zone Wizard to help you create many zones automatically.

Note the following when using the Zone Wizard:

  • You can adjust the zone margins before or after detecting zones. If you modify the margins after detection, the zones are updated and the adjusted margins are immediately visible in the viewer.

  • Follow the instructions in Tips for optimal zone discovery to get the best results.

The Zone Wizard has the following toolbar settings.

Setting

Name and Description

Previous Page icon

Previous Page:

Navigates to the previous page in the current document.

Next Page icon

Next Page:

Navigates to the next page in the current document.

Zoom In icon

Zoom In:

Increases the magnification of the current page in the Document Viewer.

Zoom Out icon

Zoom Out:

Decreases the magnification of the current page in the Document Viewer.

Actual Size button

Zoom to 100%:

Resets the magnification to the original size and resolution of the image.

Fit to Page icon

Best Fit:

Adjusts the magnification of the image so it fits within the Document Viewer.

Fit to Width icon

Fit to Width:

Fits the image by width within the Document Viewer.

Fit to Height button

Fit to Height:

Fits the image by height within the Document Viewer.

Delete selected zone

Delete:

Removes the selected zones.

Undo button

Undo:

Cancels the last selection or deletion.

Redo button

Redo:

Restores the last undone action.

Help icon

Help:

Displays the help.

Before you begin

Before you can use the Zone Wizard you must have a reference and sample documents.

Procedure
  1. Open the locator properties.
  2. Add a reference document and four sample documents.
  3. In the Locator Properties window, select the Zones tab.
  4. Select Zone Wizard.

    The reference document is displayed in the Zone Wizard window.

  5. On the toolbar, select the page containing the data that you are extracting by selecting Next Page or Previous Page.
  6. Optional. Configure the following preset settings for text zones or OMR zones, as needed.

    Setting

    Description

    Presets for Text Zones group

    Horizontal margin

    Enter or use the arrows to adjust the margins to the left and right of the detected Text zones from a range between -10.00 mm to 20.00 mm. (Default: 0.00 mm)

    Vertical margin

    Enter or use the arrows to adjust the margins to the top and bottom of the detected Text zones from a range between -10.00 mm to 20.00 mm. (Default: 0.00 mm)

    Presets for OMR Zones group

    Horizontal margin

    Enter or use the arrows to adjust the margins to the left and right of the detected OMR zones from a range between -10.00 mm to 20.00 mm. (Default: 0.00 mm)

    Vertical margin

    Enter or use the arrows to adjust the margins to the top and bottom of the detected OMR zones from a range between -10.00 mm to 20.00 mm. (Default: 0.00 mm)

  7. Select Detect Zones icon Detect Zones.

    Existing text and OMR zones are grey with no border. Detected Text zones are yellow with a yellow border. Detected OMR zones are purple with a purple border.

  8. Review and refine the detected zones by following these steps:
    1. Look at each zone to determine if it is surrounding required data. If it is, leave it in place.
    2. If needed, configure the preset OMR and Text zone margins for the detected zones.

      The margins are automatically updated for all detected zones.

    3. Delete any zones that are not needed. Select the zone and then select Delete.
  9. Select all zones you want to accept.
  10. Select Valid Field Result icon Accept Zones.

    All of your zones and associated subfields are created. You can do either of the following:

    • Continue selecting and accepting zones on this page.

    • Close the Zone Wizard and edit the accepted zones. After you have edited these zones, you can open the Zone Wizard again to accept additional zones. Repeat this as many times as necessary to add all of the zones for your document.

  11. If there are additional pages with zones you want to add, repeat steps 6–9.
  12. Select Close to close the Zone Wizard window.
  13. Open the reference document.

    The Document Viewer (zone mode) window is displayed.

  14. Double-click on each newly created zone and modify it as necessary.