The first time that you use QuickCapture Pro you must configure it to recognize with your scanning device and to communicate with the AutoCapture server.

1. Make sure you have your TWAIN or ISIS driver compatible scanner connected to your work station.
2. Using the software tools provided by the scanner manufacturer, make sure that your scanner functions properly and is able to acquire images.
3. Start QuickCapture Pro.
   • On Windows desktop, click Start > Kofax > QuickCapture Pro.
4. Before you start working, select a scanner.

   To use a	Click
   TWAIN compatible device	Options > Scanner > Select TWAIN Source
   ISIS compatible device	Options > Scanner > Select ISIS Source

5. In the Scanner Selection dialog box, select from the list of installed scanners for the selected interface.
   For more information, see Select a Scanner.
6. Connect QuickCapture Pro to the AutoCapture server.
   1. Click Options > AutoCapture > Settings Options > AutoCapture > Settings.
      Alternatively, you can just click the AutoCapture Settings button on the AutoCapture toolbar.
   2. In the AutoCapture Configuration dialog box, enter the server name and port used to connect to the server.
      If you do not know the server or port, contact your AutoStore administrator to acquire this information.
   3. Click OK.
      The server node will appear in the AutoCapture Menu window.
   4. To see AutoCapture forms and actions that are available on the server, click the server node to expand it.
   Now, images can be retrieved from the scanner. You can also open them from your computer.
7. To scan a file click the Scan button on the File toolbar or on the ribbon, click Page > Insert or Append > From Scanner.
   The image will appear in the viewport of the application and you can perform modify, save, or print the image prior to sending it to the AutoCapture server.
8. You can use the SnapIt feature of QuickCapture Pro to capture index data from images processed with OCR for input into the AutoCapture forms.
9. You can use the Barcode features of QuickCapture Pro to capture index data from Barcodes for input into the AutoCapture forms.
10. Finally, send images to the AutoCapture server.
    1. Click Send to AutoCapture button on the ribbon.
    2. In the Send to AutoCapture dialog box, select the form or an action to receive the images.
    3. Enter the name of the document, select type, in which the document will be sent to AutoCapture.
    4. Click OK.
    5. If a form was selected in the Send to AutoCapture dialog box, enter field values and click OK.
    After you complete these steps, a message box informs you about documents that were sent to AutoCapture.