Combined Client for Konica Minolta application settings

This table details Application options for the Combined Client for Konica Minolta. You can view these options by clicking a Konica Minolta iOption Application profile on the Applications tab of the Device Registration Service web application.

Option	Description
Name	A name to label the DRS application.
AutoStore Server Address	The IP address, computer name, or DNS name of the machine that hosts AutoStore Server. The default is the IP address for the local machine. You must specify an address when using AutoStore or when using both AutoStore and a Print Manager. Device actions use this address. If you do not specify this address and you enable AutoStore Scan, error code 518 appears when you perform the Register Unified Client action.
Print Manager	Specifies Equitrac or Output Manager as the print manager application.
Print Manager Address	The IP address of the machine that hosts the print manager server. The default is the local IP address. You must specify an address when Equitrac or Output Manager is specified for Print Manager. Device actions use this address if you do not enter an address for AutoStore Server Address. If you do not specify this address and you enable Print Release, the Register Unified Client action returns the error code 519.
Print Manager URI	The URI for the print manager server. The default URI is in the following format: Equitrac: `https://local_IP_address:port_number/DwsMain/services` Output Manager: `http://local_IP_address:port_number` You must specify a value when Equitrac or Output Manager is specified for Print Manager. The default port for Output Manager is 8068, and the default port for Equitrac is 8443. The URI is case sensitive, so you must specify the web folders on a server using the same case as is used on the print manager web server. You can specify HTTP or HTTPS protocols for Output Manager. If necessary, configure Output Manager for the selected protocol.
Web Application Port	The port number used by the web application. The default is 3348. Verify that this port number matches the port number that you specified when configuring AutoStore or the print manager: AutoStore only: Specify the port number configured in the Preferences settings for the Konica Minolta iOption component in AutoStore Process Designer. The default is 3348. AutoStore and print manager: Specify the port number configured for the Konica Minolta iOption component in AutoStore Process Designer. If you are using Equitrac as the print manager and Equitrac is installed on the same server as AutoStore, you must configure Equitrac to use a different port number or the Konica Minolta iOption component will fail to initialize due to a port conflict. To change the port used by Equitrac, edit the `port` setting in the KonicaPanelClient.properties file. The location for the KonicaPanelClient.properties is here: C:\ProgramData\Kofax\DeviceControlService\Settings\KonicaPanelClient.properties Output Manager only: Specify the port number configured for Server port on the Clients tab in the Set General Preferences settings of the Administration module in Output Manager. Equitrac only: This setting should match the `port` setting in the KonicaPanelClient.properties file. The default is 3348. In case of a conflict with another application on the server, you can change the `port` setting in the KonicaPanelClient.properties file to specify an unused port and configure the value here to match the new setting. The location for the KonicaPanelClient.properties is here: C:\ProgramData\Kofax\DeviceControlService\Settings\KonicaPanelClient.properties For more information about configuring settings used by the DCS Service, see Equitrac only deployment configuration. If you are using AutoStore and this port setting does not match the port setting for the Konica Minolta iOption component, a `Connection error` message appears on the device panel when a user presses the application button. If you use using a print manager only (either Equitrac or Output Manager) and this port does not match the port setting configured for the print manager application, a `Connection error` message appears on the device panel when a user presses the application button.
Use SSL for Web Application	Select True to enable the secure socket layer (SSL) for the web application. The default is False. AutoStore: If this value does not match the Use SSL setting specified for the AutoStore Konica Minolta iOption component on the Preferences, a `Connection error` message appears on the device panel when a user presses the application button. Equitrac: If you use Equitrac only and Enable SSL Transfer is not selected in the device connection settings, a `Connection error` message appears on the device panel when a user presses the application button. Output Manager: If you use Output Manager only and this value does not match the Use SSL setting on the Clients tab of the Set General Preferences settings in the Administration Module of Output Manager, `Connection error` appears on the device panel when a user presses the application button.
Application OpenAPI Port	The Konica Minolta OpenAPI port number for the Combined Client for Konica Minolta. The default is 13351. This port number is used to run the embedded KM Konica Minolta OpenAPI server for a web application.
Authority OpenAPI Port	The Konica Minolta OpenAPI port number for the Authority application. The default is 13353. This port number is used to run the embedded Konica Minolta OpenAPI Server for an authentication application.