Use DRS to configure and deploy the unified client

Administrative access to the server is required. Perform these steps from the server where the installation takes place. In Start menu, under Administrative Tools, go to Server Manager > Local Server > IE Enhanced Security Configuration and turn off Administrators.

If you are using Equitrac 6.0 and AutoStore 8.0, you can install Device Registration Service (DRS) within ControlSuite. If you are using Equitrac 5.6 or 5.7 and AutoStore 7 SP5, install DRS separately.
1. Unzip the <version_number>-DeviceRegistrationService.zip from Download installer packages. This creates a new folder containing the DeviceRegistrationService.exe.
2. Right-click the file and select Run as administrator.
3. Follow the instructions to install DRS.
Upload the Ricoh Client Package.
1. Download the Unified Client for Ricoh SOP software package, KofaxRicohUnifiedClient-<version>.zip, from the Kofax Downloads Web site (https://delivery.kofax.com).
2. Unzip the file. This creates a new folder, containing the RicohSOP<version_number>.xml file.
3. Open DRS. In a Web browser, enter http://<DRSServerIP>:9000/device, where DRSServerIP is the IP address of the server where you installed DRS.
4. Select the Files tab.
5. From the Device Type list, select Ricoh SOP.
6. At the bottom of the screen, click Upload. You can navigate to the KofaxRicohUnifiedClient-<version>.zip file, unzip it, and upload the files. You can also upload any images used for customizing the Welcome screen. The file type restriction is also validated, with a message listing the allowed extensions when errors appear.
  
  Note: Future updates of the client configurations can be also uploaded from here.
  
  The administrator can check build information for the specific package version and DRS decides what should be installed to the MFP based on the device configurations. The administrator can also install the latest version of the client, or a previous version (until that version is retired or is not supported).
  
  Note: After installing DRS, the uploaded files (using Files tab in DRS) are not part of the installer and will not be removed with the uninstallation.
Create the application in DRS.
1. Select the Applications tab.
2. Click the green () button at the top of the left Applications pane.
3. In the Name field (required), enter a name for the application.
4. In the Application Type list (required), select Ricoh SOP.
5. In the Capture Component list (required), select AutoStore.
6. In the AutoStore Server Address field (required), enter the IP address or hostname used by the AutoStore server.
7. In the AutoStore Server Port field, enter the server port used by the AutoStore server. The default value is 3310 (previously 3350).
8. In the AutoStore Server Use TLS field, select True or False. This setting must match your AutoStore server configuration. Verify it in the Preference tab of the Ricoh SOP component. By default, the AutoStore setting Use TLS is off. If you leave it as off, select False in DRS.
9. In the Print Manager list (required), select Equitrac. The rest of the Add Application fields appear.
10. In the DCE Server Address fields (required), enter the IP addresses or hostnames used by the Equitrac Server.
11. In the DRS Service URI field (required), enter the address to the DRS server. The default port number for this DRS service is 8755. Note that the address in this field must be an IP address.
12. In the Authentication entry (required), select True.
13. Click the Save button () .
Add the device in DRS.
1. Select the Devices tab.
2. Click the green () button at the top left of the Devices pane.
3. In the Name field (required), enter a name for the Ricoh device or device group that identifies it on the network.
4. In the Address field (required), enter the IP address or the hostname of the device.
5. Enter the Username and Password for the device.
6. From the Application list (required), select the application you have created. The rest of the Add Device fields appear.
7. In the Remote Install Password field (required), enter the administrator password. Note: This password can be changed by the device administrator regardless of the domain credentials.
8. In the MFP TLS (http/https) entry, select True (default) or False. It is recommended that you use https or higher TLS settings for installation.
9. In the Enable Debug Log entry, select True or False.
10. In the Server Connections Timeout entry (the timeout used by DRS when making configuration and installation calls to the device such as SP modes and deployment of the client.), select a specified period of time (default is 60).
11. In the Device Type list (required), choose between Single-Function Printer (SFP), Multi-Function Printer (MFP) or Specific model (MP C306/MP C406) device. Note: This selection affects available workflow applications.
12. In the Authentication Screen field, select Welcome (default) or Logon.
13. In the Assign as Home Key Application field, select True or False.
14. In the Scan preview entry, select True or False.
15. In the Application Package list (required), select an application package from this list. The selected application package is downloaded to a device by the Install action. List items are populated by the uploaded files specified on the Files tab.
16. In the Customize Assets field, choose select True or False. If True is selected, the following fields appear:
  - In the Application Logo list (required), select the image file. The following image types are available: JPG, JPEG, PNG or BMP.
  - In the Welcome Screen Image list (required), select relevant image file.
  - In the Customize Welcome Screen Text field, choose True or False. If True is selected, the Welcome Screen Text field appears. Enter your text.
  Note: The information () icon next to the field names explains the file type, image resolution, and text length restrictions
  To upload the assets, go to the Files tab and select a file that conforms to the previous specifications. Once uploaded, the file appears in the list (for Application Logo and Welcome Screen Image, respectively depending on the uploaded file’s size). Note: Uploaded files that do not conform will not show in the list.
17. In the Customize Workflow Buttons field, choose True or False. If True is selected, the Workflow Application field appears. Choose the available workflow applications for your device.
18. Click the Save () button at the top of the Add Device pane.
  
  For more details, see Device properties
Install the client application onto the device.
1. From the Select Actions list at the top of the Details pane, select Full Install. For details, see Actions reference. Note: To go back to the default values for assets, you must set and resync.
2. Click the Run Action icon () to run the action. This may take a few minutes to complete. Once finished, a Successfully completed message appears in the Action History pane at the bottom of the screen.
Locate the auto-added device and configure it in Equitrac System Manager. For instructions, see the Server-side configuration.