Unified Client for Lexmark application properties
A DRS application profile for the Unified Client for Lexmark specifies connection information for an AutoStore server and a Print Manager server. This information allows a Lexmark device to use capture and print management services on these servers.
These properties appear in the DRS Details pane when you add or edit a Unified Client for Lexmark application. You cannot change the application type for an existing application.
Click the edit button to edit the parameters for a device. Click the save
button to save changes to the parameters or click the cancel
button to discard
changes.
Property | Description |
---|---|
Name |
A name that uniquely identifies an application. |
Server Configuration | Choose the print and capture servers for the application:
The remaining properties appear based on the Server Configuration selection. You cannot change the server configuration type after you save a new application profile. |
AutoStore Server Address |
If AutoStore is selected as the Capture Component, enter the server host name. |
AutoStore Server Port |
The port that the AutoStore server uses to communicate with the Unified Client for Lexmark. This setting must match the port number that is set on the Preferences tab of the Lexmark Unified Client component settings in AutoStore. The default is 3310. |
AutoStore Server Use TLS |
Select True or False. This setting should reflect your AutoStore Server configuration. Verify it in the Preference tab of Unified Client for Lexmark component. By default, the AutoStore setting Use TLS is off. If you leave it as off, select False in DRS. |
DCE Server Address |
The address for the primary device control engine for Equitrac. Identifies an Equitrac server to be used to print documents. The server type must correspond to the Print Manager setting. This can be an IP address, a system name (if the systems are in the same domain), or a fully qualified domain name. |
DCE Server #2 Address |
The address of a second fail safe device control engine for Equitrac. This setting is optional and is only displayed if 2 DCEs are installed. |
DCE Server #3 Address |
The address of a third fail safe device control engine for Equitrac. This setting is optional and is only displayed if 3 DCEs are installed. |
DCE Server #4 Address |
The address of a fourth fail safe device control engine for Equitrac. This setting is optional and is only displayed if 4 DCEs are installed. |
DCE certificate pinning | Select True to bind a certificate to the Equitrac DCE upon connection and use it to validate the trust of subsequent communications with that server. |
Bypass Button | Select True to allow users to skip authentication to use the device native functions without logging in. |
Print Manager Address | The IP address or hostname of the Output Manager server. |
Print Manager Port |
The port that the Output Manager server uses to communicate with clients if TLS is not used. This setting must match the port that is set for the Output Manager server. The default setting for Output Manager is 8068. |
Print Manager Use TLS |
The port that the Output Manager server uses to communicate with clients if TLS is used. This setting must match the port that is set for the Output Manager server. The default setting for Output Manager is 8069. |
Authentication | This setting is set to True if the Unified Client for Lexmark is an authentication provider on the device or False if authentication is completed by a third-party provider, such as CAC. This field is used for Equitrac or Output Manager. |