Device properties for Combined Client for Ricoh
Combined Client for Ricoh device properties are configured in the Device Registration Service web console. When configured for a device group, they can be propagated to any device in the group.
These parameters define the device settings. Click the edit button to
edit the parameters for a device. Click the save
button to save changes to the parameters or
click the cancel
button to discard changes.
Option | Description |
---|---|
Name |
The name of the Ricoh device or device group. |
Address |
The IP address or DNS address of the Ricoh device. This is a device only parameter and will not be displayed when
configuring parameters for a device group.
|
Inherit Properties from Group |
This option only appears for a device that is a member of a device group.
|
Username |
The administrator user name for the Ricoh device. The default is "admin".
Username is not required to perform a selected
action on the device.
|
Password |
The administrator password for the Ricoh device. The default password is none. |
Application |
The application that is associated with the Ricoh device or device group. |
Device Group |
Click a group name in this box to change group membership. When a device is a member of a group in can optionally inherit device settings defined for the group. This allows you to simultaneously manage settings for multiple devices. Select the [Devices] option in this list to entirely remove a device from group membership. |
Remote Install Password | The remote password for the Ricoh device. This password is required for uploading the Combined Client for Ricoh Xlet to a Ricoh ESA device. The default remote install password is "ricoh". |
Enable Print Release | Set this to True to enable the Print Manager after login. The default value is True. |
Enable Scan | Set this to True to enable the AutoStore scan functionality. The default value is True. |
Default Functionality | Specifies to initially display the capture or print function (AutoStore or Print Manager) after a user logs on to a device. The default setting is AutoStore. |
Authentication |
Specifies which application performs the login and which login method that it will use. See the authentication option table below. The default setting is Print Manager Authentication. Options are:
If you select Print Manager Authentication with Device Access Control, Print Manager Authentication, or AutoStore Authentication and the Ricoh device has a Smart Operation Panel, set SmartPanel Compatibility Mode to True. For more information on the authentication modes settings, refer to Ricoh authentication modes. |
Secure Communication |
Enables secure socket layer (SSL) communication. The default value is False. The connection profile is HTTP when this is set to False or HTTPS when this is set to True. For Equitrac, this setting must be set to True. |
Log Level | The level of logging. There are four options:
|
Smart Operation Panel Compatibility Mode |
Enables authentication compatibility between the Combined Client for Ricoh and Ricoh devices that have a Smart Operation Panel. Set the value to True if the device has a Smart Operation Panel and the Authentication value is Print Manager Authentication with Device Access Control, Print Manager Authentication, or AutoStore Authentication. The Combined Client for Ricoh shows a graphical Logout button because the Smart Operation Panel does not have a Logout key. Set the value to False for Ricoh devices that do not have a Smart Operation Panel. Users log out by pressing the Logout key on the standard device panel. |
Print Manager Date Format | The format used for dates displayed by the print manager server. |
Print Manager DateTime Format | The format used for date and time displayed by the print manager server. |
AS Application Name | The name of the application displayed on the device panel. The default is AUTOSTORE workflow. |
AS Status Refresh Interval | The refresh interval for AutoStore in seconds. The default is 60 seconds. |
AS Batch Scan Timeout | When batch scanning mode is enabled, the period of inactivity (in seconds) at the device panel before the Combined Client for Ricoh sends the batch scan job to AutoStore. For example, you use the default of 60 seconds. If a user scans a batch of 12 documents and leaves the device, the Combined Client for Ricoh sends the job to AutoStore 60 seconds after the last document enters the scanner. |
Print Manager Application Timeout |
The period of inactivity (in seconds) at the device panel before the Combined Client for Ricoh automatically logs a user off the device. On a device that operates with a Java platform version older than 10.x, the period of inactivity starts with a key or button click when the Combined Client for Ricoh is active on the panel. On a device that operates with Java platform version 10.x or newer, the period of inactivity starts with a key or button click from any application. The default is 300 seconds. |
Display Destination Specific Documents only | If the option is set to True, the device only shows the user's jobs that were sent to the specific device. If this option is set to False, all of the users print jobs show on a device, regardless of where they were sent. The default is False. |
Print Manager Enable SSO Provider | Enables notification to SSO Provider of user login and logout events when the print manager is the login application. Enable this only when both the following criteria exist:
|
Use SNMPv3 | Use SNMPv3 for tracking print jobs (securely communicating print counts, copy counts, and so forth). To use this feature, you need to enable and configure SNMPv3 functionality on a device. |
Device Context Name | Set this to match the SNMPv3 context name setting configured on the device. |
Account Name | Set this to match the SNMPv3 account name setting configured on the device. |
Authentication Password | Set this to match the SNMPv3 authentication password (user) setting configured on the device. |
Encryption Password | Set this to match the SNMPv3 encryption password (user) setting configured on the device. |
Authentication Algorithm |
Specifies the cryptographic hash function used to protect authentication information.
|
Encryption Algorithm |
Specifies the encryption algorithm used to encrypt communications with a device.
|
Client Package | Select a client package from this list. The selected application package
is downloaded to a device by the Install action. List items are
populated by the uploaded files specified on the
Files tab. Ricoh ESA installation packages are downloaded from the Equitrac Partner Portal or from the Web Licensing Portal. For information about how to add a Ricoh ESA installation package to DRS, see Upload the Ricoh Combined Client Xlets to the server. |
SSO Package | Select an SSO package from the list. To enable notification to Provider
of user login and logout events when the print manager is the login
application, you must also choose True for the
Print Manager Enable SSO Provider option on this
tab. Ricoh ESA installation packages are downloaded from the Equitrac Partner Portal or from the Web Licensing Portal. For information about how to add a Ricoh ESA installation package to DRS, see Upload the Ricoh Combined Client Xlets to the server. |