Reference to Automation Device

The automation devices that Robots can run are the following: a local Windows computer, the one the Robot is running on, or a remote Windows computer at some IP address that the Robot can reach. The remote computer must run a Desktop Automation Service that allows the Robot to control that computer.

1. To connect to a remote computer in the workflow of your project, create a device mapping first. To do so, click File > New Automation Device Mapping. Create a new mapping, then proceed to editing the Robots. See Map Automation Device.

2. Provide a device reference by clicking Add in the Required Devices field on the Action tab of the Call Robot step in the Basic Engine Robot .

3. In the Add Device window, select Static Reference, Dynamic Reference, or Trigger Reference.

   • Static reference implies that you created one or more Automation Device mappings to choose from. The robot automates the devices associated with the selected mapping. Mapping information is required for automating Windows devices and it is not required for automating terminals, working with the built-in browser, and the Built-in Excel Driver. If you change the mapping, click Refresh in Design Studio to renew the connection. Use static reference when using Local Desktop Automation.

   • Dynamic reference is a type of reference that helps you connect to automation devices in Single User Mode, such as by using the Remote Desktop Protocol (RDP) connection. Specify a mapping name to use in the Connect to Device step. All other connection parameters are specified within the Robot workflow. Once the Dynamic Reference connection is used by the robot in the Call Robot step and the device is connected, the connection stays alive and you can use this reference (and this device) in the next Call Robot steps in your robot.

     You can only connect to the same device once during the execution of a workflow. For example, if you want to connect to a device in a loop, make sure your robot skips the connection step in the loop when the connection is already established.

   • Trigger reference implies that you created one or more Automation Device mappings to choose from. Attended automation robots connect to devices associated with the selected mapping. When creating a device mapping, specify host, port, and a token of the device. See Map Automation Device.

     Do not provide any references for the operations run on the local computer, such as accessing websites in the built-in browser and working with Excel spreadsheets in the built-in Excel driver. "local" reference is always available by default whether any other references are provided or not.

4. If you have added any automation devices in the previous steps, proceed to editing the Robot . Point to the middle of the Devices pane in the Attributes pane, click the plus sign, and then select the type of the device you want to add from the drop-down list: static, dynamic, or trigger. Then type the name of the automated device.

   • The names of the devices that you set in the Robot may differ from those in the Basic Engine Robot. In the Robot editor, you can rename the device from the context menu if needed. When the device is renamed here, the name change is reflected in all of the steps where the device is used.

   • The number of devices specified in the Basic Engine Robot and the Robot must match.