ControlSuite Client Help
Welcome to Kofax ControlSuite Clients
ControlSuite Clients
Unified Clients Overview
Brother Unified Client
Deployment steps
Requirements
Supported languages
Preparing for deployment
Verify that your device is supported
Verify prerequisites
Download installer package
Installing the Unified Client for Brother
Installing ControlSuite
Use DRS to configure and deploy the Unified Client
Manual Device Configuration
Generating CA Certificate using IP Address
Uninstalling Client using DRS
Setting up a Brother device
Ensure that BSI is enabled on the device
Ensure that application entry menus and CA certificate entry are available
Configure the Brother device in case Mass Deployment Tool is not in use
Install CA Certificate in case Mass Deployment Tool is not in use
Set up screen displayed on the Brother device after login
Recommendations for Brother device settings
Using the Unified Client for Brother
Features
Creating a capture workflow
Configure Send to Folder
Creating a print workflow
Use Print-to-Me
Configure Equitrac for use with the Unified Client for Brother
CAS offline operation through DCE caching
Typical user workflows
Log in to the Unified Client for Brother
Login with Equitrac and AutoStore
Login with Equitrac only
Login with AutoStore only
Register your card
Card readers
Card reader setup
Function Access Control
Enter Billing Codes
Print-to-Me
Release All
Release Key
Scan a document
Field Types
Checkbox field
Date field
Label field
List field
Lookup list field
Numeric field
Text field
Tree field
Scan Settings
Logout
Reference
Application properties
Device properties
Actions reference
Unified Client failover
Troubleshooting
Error messages
Canon Unified Client
System requirements
Third-party application dependencies
Supported languages
Switch language on the device
Deployment steps
Deploying with AutoStore
Deploying with Equitrac
Deploying with AutoStore and Equitrac
Deploying with Output Manager
Deploying with AutoStore and Output Manager
Preparing for deployment
Verify that your device is supported
Verify prerequisites
Installing the Unified Client for Canon
AutoStore server installation and configuration
Equitrac server installation and configuration
Output Manager server installation and configuration
Setting up a Canon device
Configure the device language and date/time settings
Enable SSL for remote UI
Install Canon application for AutoStore
Install Canon application for Equitrac or AutoStore and Equitrac
Install Canon application for Output Manager or AutoStore and Output Manager
Set the home screen for the guest user
Configure the TLS certificates
Recommendations for Canon device settings
Check the Canon platform version
Use DRS to configure and deploy the Unified Client
Set up with AutoStore
Set up with Equitrac
Set up with AutoStore and Equitrac
Set up with Output Manager
Set up with AutoStore and Output Manager
Install certificates in a ControlSuite NLB environment
Using the Unified Client for Canon
Set up your first AutoStore capture workflow
Configure scan to folder
Scanning with the Unified Client for Canon
Basic scan overview
Scan settings
Scan form overview
Text field
Numeric input field
Simple List field
Extendable/Multiselect/Database lookup fields
Date field
Tree field
Button field
Checkbox field
Label field
Complex scan overview
Scan limitations and constraints
Set up your first print job in Equitrac
Configure Print-to-Me
Use Print-to-Me
Set up your first print job in Output Manager
Configure Output Manager
Add a device
Set print preferences
Canon Unified Client Launcher screen
Main Menu button
Reference
Application properties
Device properties
Actions reference
Files Tab
Return codes
Appendix: Additional configuration instructions
Security
Configuring AA Common Access Card authentication solution
Changing the TLS settings
CAC Authentication and Equitrac MEAP Authentication solution
Set the Canon Auto Reset Timer
Canon licensing
Move the logo to the first screen
Renaming Embedded Application on Home Screen
Select user display style
Add a new Device profile
Import device information
Authentication and identification
Hardkey behavior
Server reconfiguration behavior
System timeout
Offline behavior
Appendix: Additional AutoStore instructions
Configuring authentication
LDAP Lookup Settings dialog box
Integration with MFP authentication
Adding and editing groups
Basic form
Scanning settings
Email form
Folder form
SharePoint form
Authentication tab
Authentication Prompts dialog box
Authenticate with Custom Scripting
Configuring the Scanning Settings
Scripting overview
Unified Client component RRTs
Unified Client communication ports
Troubleshooting
Numeric field issue (on the server side)
User is removed from the current workflow
Device administrator cannot log in and cannot reach Settings > Registration
Documents sent from Kofax Business Connect cannot be printed
Canon device DRS configuration fails
Default Canon device administrator password fails
KBC authentication is not working when "Require PIN with card swipe" is enabled in OM settings
Epson Unified Client
Deployment steps
Prepare for deployment
Verify that your device is supported
Verify prerequisites
Download installer packages
Set up a scan watch folder
Installing the Unified Client for Epson
Install Equitrac
Install the Equitrac server
Enable Page Counters
Installing ControlSuite
Use DRS to configure and deploy the unified client
Device Web Server
Deployment scenarios
Managing the Device Web Server
Install the DWS with eCopy ShareScan
Install DWS after moving to an eCopy ShareScan only environment
Move to an eCopy ShareScan and Equitrac environment
Setting up the Epson MFP
Configure the Epson MFP
Update card reader settings to support Kofax Business Connect
Configuring the Unified Client for Epson
Setting up your first print workflow
Configure Print-to-Me
I-Queue printing
Use Print-to-Me
Reference
Application properties
Move from one DWS to another
Devices properties
Actions reference
Return codes
Appendix
Additional documentation
Troubleshooting
Fujifilm Unified Client
Requirements
Preparing for deployment
High availability support
Equitrac configuration
Configure authentication prompts
Configure Print-to-Me
Cached credentials for Equitrac
Campus card support
Output Manager configuration
Set print preferences
AutoStore configuration
Scanning settings in AutoStore
Device configuration
NVM setting
Set the IP mode
Device timeouts
FIPS 140-2 compatibility
Embedded Web Browser
DWS configuration
Dual stack limitations
Certificate management
DWS certificate management
Server certificate management
Device certificate management
Authentication configuration
Configure CAC for authentication
Card reader configuration
Configuring card reader authentication
Configuring card self-registration
Deploying the Unified Client for Fujifilm
Deployment overview
Use DRS to deploy and configure the unified client
Unregister the Unified Client for Fujifilm from the device
Create an AutoStore workflow
Using the Unified Client for Fujifilm
Getting started
Log in to the Unified Client for Fujifilm
Log in as an administrator
Microsoft Entra ID authentication with card registration
Card self-registration
Launcher screen
Screen elements
Device Home button
Release All
Release Key
Billing codes
Enter a billing code
Change the language on the device
Log out
Printing
Use Print-to-Me
Print Job Details screen
Print Settings screen
Print with Kofax Business Connect
Reconcile print transactions
Scanning
Scan a document
Scan metadata
Add email address to native emails
Job tracking
Data collected in tracking
Reference
Actions
Application properties
Device properties
Troubleshooting the Unified Client for Fujifilm
Download device logs
Download DWS debug logs
Error messages
HP Unified Client
Features
Authorization
Deployment steps
Requirements
Preparing for deployment
Verify prerequisites
Equitrac configuration
Configure authentication prompts
Output Manager configuration
Set print preferences
AutoStore configuration
Scanning settings
Authentication configuration
Configure CAC for authentication
Workflow configuration
Custom workflows
Card reader configuration
Configuring card self-registration
DWS configuration
Dual stack limitations
Deploying the Unified Client for HP
Installing ControlSuite
Update DWS certificates
Use DRS to configure and deploy the unified client
Setting up the HP device
Ensure that previous Kofax applications are cleared
Creating a print workflow
Configure Print-to-Me
Creating a capture workflow
Configure the Send to Folder workflow
Using the Unified Client for HP
Getting started
Log in to the Unified Client for HP
Microsoft Entra ID authentication with card registration
Card self-registration
Launcher screen
Release All
Release Key
Billing codes
Enter billing codes
Log out
Printing
Print-to-Me
Use Print-to-Me
Print Jobs Details
Print Settings
Print with Business Connect
Reconcile print transactions
Scanning
Scan a document
Scan settings
Job tracking
Data collected in tracking
Reference
Unified Client for HP actions reference
Unified Client for HP application properties
Unified Client for HP device properties
Unified Client failover
Troubleshooting
Error messages
Konica Minolta Unified Client
Product features
Campus card support
Delegate printing support
Runtime Replacement Tag (RRT) support
Failover support
System requirements
Supported devices
Prepare for deployment of Unified Client for Konica Minolta
Equitrac configuration
Configuring authentication prompts
Output Manager configuration
Set print preferences
Configure device for access control
AutoStore configuration
Scanning settings in AutoStore
Dynamic form support
Migrate workflows
Workflow configuration
Walk-up copy workflows and billing codes
Authentication configuration
Credential caching
DWS configuration
DWS configuration for TLS
Certificate management
DWS certificate management
Server certificate management
Device certificate management
Certificate acceptance
Dual stack limitations
Device configuration
SSL
Enable and configure SSL
TCP socket setting
Page size release
Web browser
WebDAV client
Auto reset
Printing support
Hide slide menu tab
Update HTTP setting
Card reader configuration
Considerations for setting up a card reader
Configuring card reader authentication
Configuring card self-registration
Deploy Unified Client for Konica Minolta
Overview of the deployment process
DRS setup and device registration
Change configuration
Unregister Unified Client for Konica Minolta from the device
Create a first workflow in AutoStore
Using Unified Client for Konica Minolta
Getting started with the Unified Client for Konica Minolta
Logging on
Card self-registration
Public access
Billing codes
Launcher screen
Release key
Device Home button
Screen elements
Logging off
Printing features
Print job management
Print-to-Me screen
Print Jobs Details screen
Print Settings screen
Printing with Kofax Business Connect
Scanning features
Scan documents
Scan form fields
Job tracking
Data collected in tracking
Reference
Unified Client for Konica Minolta application properties
Unified Client for Konica Minolta device properties
Unified Client for Konica Minolta actions reference
Debugging tips
DWS debug logs
Device debug logs
Troubleshooting the Unified Client for Konica Minolta
Error messages
Lexmark Unified Client
Features
System requirements
Prepare to deploy the Unified Client for Lexmark
Device configuration
Enable HTTPS
Create a local device administrator
Equitrac configuration
Configure authentication prompts
Configure the Quick Shortcut buttons
DCE pinning
Output Manager configuration
Add a device
Set print preferences
AutoStore configuration
Scanning settings
Workflow configuration
Walk-up copy workflows and billing codes
Authentication configuration
Configure CAC for authentication
Card reader configuration
Configuring card self-registration
Deploy the Unified Client for Lexmark
Use DRS to configure and deploy the unified client
Using the Unified Client for Lexmark
Getting started
Log onto the Unified Client for Lexmark
Card self-registration
Change the language on the device
Launcher screen
Home button
Screen elements
Release All
Release Key
Billing codes
Log out
Printing
Print-to-Me
Print Jobs Details
Print Settings
Print with Business Connect
Scanning
Create an AutoStore workflow
Scan settings
Scan a document
Job tracking
Data collected in tracking
Reference
Unified Client for Lexmark actions reference
Unified Client for Lexmark application properties
Unified Client for Lexmark device properties
Debugging tips
Download debugging logs
Troubleshooting
Error messages
Ricoh Unified Clients
Ricoh SOP for AutoStore
Deployment steps
Prepare for deployment
Requirements
Verify prerequisites
Download installer packages
Deploy the Unified Client for Ricoh Smart Operation Panel
Install and configure the AutoStore server
Install ControlSuite for AutoStore
Configuring a Ricoh device in a unified client environment
Install and configure the TLS certificates
Ensure that previous applications are cleared
Use DRS to configure and deploy the unified client
Upgrade from Ricoh SOP 1.2.0 to 1.3.0
Uninstall the client using DRS
DRS authorization
Using the Unified Client for Ricoh Smart Operation Panel
Elements of Unified Client for Ricoh Smart Operation Panel user interface
Launcher screen
Set up your first AutoStore Capture workflow
Configure Scan to Folder
Reference
Unified Client for Ricoh actions reference
Return codes
Action status codes
Unified Client for Ricoh application properties
Unified Client for Ricoh device properties
Device status
Files tab
Application types
Add a device profile
Import device information
Appendix: Additional configuration instructions
Troubleshooting
Download logs
Device configuration for AuthOff
Configuring the Common Access Card authentication solution
Configure SP Mode Settings
Change the TLS settings
DRS Authorization Key
Restart the device
Ricoh SOP for AutoStore and Equitrac
Deployment steps
Prepare for deployment
Requirements
Verify prerequisites
Download installer packages
Deploy the Unified Client for Ricoh Smart Operation Panel
Install and configure the AutoStore server
Install the Equitrac server
Enable login for CAS offline mode through DCE caching
Install ControlSuite for AutoStore and Equitrac
Use DRS to configure and deploy the unified client
Upgrade from Ricoh SOP 1.2.0 to 1.3.0
Uninstall the client using DRS
DRS authorization
Set up a Ricoh MFP device
Configuring a Ricoh device in a unified client environment
Install and configure the TLS certificates
Ensure that previous applications are cleared
Configuring Equitrac to use with Unified Client for Ricoh Smart Operation Panel
Configure Equitrac
Installation and configuration
Server-side configuration scenario
Additional documentation for Equitrac 5.7
Equitrac card readers
Card reader setup
USB Keyboards
Using the Unified Client for Ricoh Smart Operation Panel
Elements of the Unified Client for Ricoh Smart Operation Panel user interface
Launcher screen
Getting started
Logging into Unified Client for Ricoh Smart Operation Panel
Azure AD authentication with card registration
If you have difficulty logging in
Enter billing codes
Print-to-Me
Scanning
Terminology
Prepare to scan
Delivery formats
Search using LDAP Email
Logout
Set up your first AutoStore Capture workflow
Configure Scan to Folder
Set up your first print workflow
Use Print-to-Me
Reference
Unified Client for Ricoh actions reference
Return codes
Action status codes
Unified Client for Ricoh application properties
Unified Client for Ricoh device properties
Device status
Files Tab
Application types
Add a new Device profile
Import device information
Appendix: Additional configuration instructions
Troubleshooting
Download logs
Job tracking
Enable home key settings
Enable the billing code prompt
Disable print from USB
Configuring the Common Access Card authentication solution
Configure SP mode settings
Change the TLS settings
Set the paper type
System configuration settings
DCE pinning
DRS Authorization Key
Restart the device
Ricoh SOP for AutoStore and Output Manager
Deployment steps
Prepare for deployment
Requirements
Verify prerequisites
Download installer packages
Deploy the Unified Client for Ricoh Smart Operation Panel
Install and configure the AutoStore server
Install and configure Output Manager
Install ControlSuite for AutoStore and Output Manager
Use DRS to configure and deploy the unified client
Upgrade from Ricoh SOP 1.2.0 to 1.3.0
Uninstall the client using DRS
DRS authorization
Set up a Ricoh MFP device
Configuring a Ricoh device in a unified client environment
Install and configure the TLS certificates
Ensure that previous applications are cleared
Using the Unified Client for Ricoh Smart Operation Panel
Elements of the Unified Client for Ricoh Smart Operation Panel user interface
Launcher screen
Getting started
Typical usage
Output Manager login
Login settings
User name and password entry
Card swipe
Manual ID entry
Azure AD authentication with card registration
Screen layout
View print jobs
Logout
Set up your first AutoStore Capture workflow
Configure Scan to Folder
Set up your first print workflow
Add sources
Add destinations
Manually route documents to a destination
Reference
Unified Client for Ricoh actions reference
Return codes
Action status codes
Unified Client for Ricoh application properties
Unified Client for Ricoh device properties
Device status
Files tab
Application types
Add a new device profile
Import device information
Appendix: Additional configuration instructions
Troubleshooting
Download logs
Job tracking
Enable home key settings
Disable print from USB
Configuring the Common Access Card authentication solution
Configure SP Mode Settings
Change the TLS settings
Set the paper type
DRS Authorization Key
Restart the device
Ricoh SOP for Output Manager
Deployment steps
Prepare for deployment
Requirements
Verify prerequisites
Download installer packages
Deploy the Unified Client for Ricoh Smart Operation Panel
Install and configure Output Manager
Install ControlSuite for Output Manager
Use DRS to configure and deploy the unified client
Upgrade from Ricoh SOP 1.2.0 to 1.3.0
Uninstall the client using DRS
DRS authorization
Set up a Ricoh MFP device
Configuring a Ricoh device in a unified client environment
Install and configure the TLS certificates
Ensure that previous applications are cleared
Using the Unified Client for Ricoh Smart Operation Panel
Elements of the Unified Client for Ricoh Smart Operation Panel user interface
Launcher screen
Getting started
Typical usage
Output Manager login
Login settings
User name and password entry
Card swipe
Manual ID entry
Azure AD authentication with card registration
Screen layout
View print jobs
Logout
Set up your first print workflow
Add sources
Add destinations
Manually route documents to a destination
Reference
Unified Client for Ricoh actions reference
Return codes
Action status codes
Unified Client for Ricoh application properties
Unified Client for Ricoh device properties
Device status
Files tab
Application types
Add a new Device profile
Import device information
Appendix: Additional configuration instructions
Troubleshooting
Download logs
Job tracking
Enable home key settings
Disable print from USB
Configuring the Common Access Card authentication solution
Configure SP Mode Settings
Change the TLS settings
Set the paper type
DRS Authorization Key
Restart the device
Ricoh PCC for Equitrac
Deployment steps
Prepare for deployment
Requirements
Verify prerequisites
Download installer packages
Deploy Ricoh PCC
Install the Equitrac server
Enable login for CAS offline mode through DCE caching
Install ControlSuite for Equitrac
Set up the Equitrac Embedded for Ricoh PCC SFP or MFP
Configuring a Ricoh device in a unified client environment
Install and configure the TLS certificates
Ensure that previous applications are cleared
Use DRS to configure and deploy the unified client
Upgrade from Ricoh PCC 5.2.0 to 5.3.0
Uninstall the client using DRS
DRS authorization
Configuring Equitrac to use with Ricoh PCC
Configure Equitrac
Installation and configuration
Server-side configuration scenario
Additional documentation for Equitrac 5.7
Equitrac card readers
Card reader setup
USB keyboards
Using Ricoh PCC
Elements of the Ricoh PCC user interface
Launcher screen
Getting started
Logging in
Azure AD authentication with card registration
If you have difficulty logging in
Enter billing codes
Print-to-Me
Scanning
Terminology
Prepare to scan
Delivery formats
Search using LDAP Email
Logout
Set up your first print workflow
Use Print-to-Me
Reference
Actions reference
Error codes
Return codes
Action status codes
Application properties
Device properties
Device status
Files tab
Application types
Add a new Device profile
Import device information
Appendix: Additional configuration instructions
Troubleshooting
Download logs
Job tracking
Enable home key settings
Enable the billing code prompt
Disable print from USB
Configuring the Common Access Card authentication solution
Configure SP Mode settings
Change the TLS settings
Set the paper type
System configuration settings
DCE pinning
DRS Authorization Key
Restart the device
Supporting a mixed fleet environment
Ricoh PCC for AutoStore and Equitrac
Deployment steps
Prepare for deployment
Requirements
Verify prerequisites
Download installer packages
Deploy Ricoh PCC
Install and configure the AutoStore server
Install AutoStore
Install the Equitrac server
Enable login for CAS offline mode through DCE caching
Install ControlSuite for Equitrac and AutoStore
Use DRS to configure and deploy the unified client
Upgrade from Ricoh PCC 5.2.0 to 5.3.0
Uninstall the client using DRS
DRS authorization
Set up a Ricoh PCC MFP
Configuring a Ricoh device in a unified client environment
Install and configure the TLS certificates
Ensure that previous applications are cleared
Configuring Equitrac to use with Ricoh PCC
Configure Equitrac
Installation and configuration
Server-side configuration scenario
Equitrac card readers
Card reader setup
USB keyboards
Using Ricoh PCC
Elements of the Ricoh PCC user interface
Launcher screen
Getting started
Logging in
Azure AD authentication with card registration
If you have difficulty logging in
Enter billing codes
Print-to-Me
Scanning
Terminology
Prepare to scan
Delivery formats
Search using LDAP Email
Logout
Set up your first AutoStore Capture workflow
Configure Scan to Folder
Set up your first print workflow
Use Print-to-Me
Reference
Actions reference
Return codes
Action status codes
Application properties
Device properties
Device status
Files tab
Application types
Add a new device profile
Import device information
Appendix: Additional configuration instructions
Troubleshooting
Download logs
Job tracking
Enable home key settings
Enable the billing code prompt
Disable print from USB
Configuring the Common Access Card authentication solution
Configure SP Mode settings
Change the TLS settings
Set the paper type
System configuration settings
DCE pinning
DRS Authorization Key
Restart the device
Supporting a mixed fleet environment
Samsung Smart UX Unified Client
Checklist: Unified Client for Samsung Smart UX implementation
Requirements
Multi-language support
Configuring Kofax Unified Client for Samsung Smart UX
AutoStore configuration
AutoStore features
AutoStore server-side configuration
Additional documentation for AutoStore
AutoStore Smart UX component licensing
Equitrac configuration
Equitrac features
Installation and configuration
Before you install
Equitrac server-side configuration
Additional documentation for Equitrac
Equitrac card readers
Card reader setup
USB keyboards
Use DRS to configure and deploy the unified client
Set up with AutoStore
Set up with Equitrac
Set up with AutoStore and Equitrac
Server-side configuration
Licensing Unified Client for Samsung Smart UX
If the license is invalid
If the serial number is denied
Add a printer on a TCP/IP printer port
Configuring Unified Client for Samsung Smart UX embedded devices
Automatically creating embedded devices
Manually configuring embedded devices
Licensing the device
Enabling the Guest user
Guest user setup
Configuring workflows
Tracking jobs originating at the device
Setting timeouts
Enabling secure printing
Secure printing on the physical device
Enable secure printing on the embedded device
Configure Print-to-Me
Configure Capture and Send
Scan-to-Me
Configure the Mail Server
Enforce color quotas
Enable the billing code prompt
Operation through DCE caching
Configure account and session display
Configuring available MFP functions
Samsung Smart UX workflow and workflow container settings for the device
Using Kofax Unified Client for Samsung Smart UX
Elements of Unified Client for Samsung Smart UX user interface
Getting started
Logging into Unified Client for Samsung Smart UX
If you have difficulty logging in
Enter billing codes
Using Print-to-Me
Scanning
Terminology
Prepare to scan
Using LDAP Email Search
Reference
Application properties
Device properties
Device status
Files tab
Actions reference
Return codes
Action status codes
Toshiba Unified Client
Features
Deployment steps
Preparing for deployment
Verify prerequisites
Language support
Download installer packages
Device Web Server
Deployment scenarios
Managing the Device Web Server
Install the DWS with AutoStore
Install the DWS after moving to an AutoStore only environment
Move to an AutoStore and Equitrac environment
Equitrac configuration
Set up the Kofax button on Equitrac
Configure the Launcher
Enabling the Guest user
Set up the Guest user
Configure workflows
Track jobs originating at the device
Configure card self-registration
Secure printing
Configure the print queue
AutoStore configuration
Set up the Kofax button on AutoStore
Scan settings
Deploying the Unified Client for Toshiba
Installing the Unified Client for Toshiba
Installing ControlSuite
Install the AutoStore server
License AutoStore
Installing Equitrac
Install the Equitrac server
Install the Equitrac hotfixes
Install DWS standalone
Install DRS and upload the client package
Set up the Toshiba MFP
Configure the Toshiba MFP in a Kofax Unified Client environment
Install SSL/TLS root certificate
Import or create the Device Certificate on the Toshiba device
Ensure SSL/TLS is enabled for ODCA on the Toshiba device
Clear previous applications
Set up your first capture workflow
Configure Send to Folder
Set up your first print workflow
Configure Print-to-Me
I-Queue printing
Enable release keys
Using the Unified Client for Toshiba
Getting started
Logging into Unified Client for Toshiba
Elements of the user interface
Launcher
Release All
Release key
Enter billing codes
Use Print-to-Me
Scanning
Prepare to scan
Using Native Copy, Fax, and Scan
Logging out
Reference
Device properties
Actions reference
Application properties
Return codes
Device notes
Changing the EXTENSION button label
Finalizing the uninstallation
Reboot the device
Troubleshooting
Xerox Unified Client
System requirements
Prepare for deployment of Unified Client for Xerox
Equitrac configuration
Configuring authentication prompts
Output Manager configuration
Set print preferences
AutoStore configuration
Scanning settings in AutoStore
Scan settings constraints
Dynamic form support
Migrate workflows
Workflow configuration
Centralized and decentralized workflows
Walk-up copy workflows and billing codes
Authentication configuration
Xerox component RRTs
Credential caching
Timeout configuration
DWS configuration
Failover support
DWS configuration for TLS
Certificate management
DWS certificate management
Server certificate management
Device certificate management
Export the root self-signed certificate from DWS
Device configuration
AltaLink configuration
PrimeLink configuration
VersaLink properties
Dual stack limitations
Card reader configuration
Card reader licensing
Adding card reader support
Adding Smart Card Support
Configuring card reader authentication
Configuring card self-registration
Deploy Unified Client for Xerox
Overview of the deployment process
DRS setup and device registration
Unregister Unified Client for Xerox from the device
Set language of client
Create a first workflow
Using Unified Client for Xerox
Getting started with the Unified Client for Xerox
Logging on
Card self-registration
Azure AD authentication with card registration
Billing codes
Launcher screen
Release key
Device Home button
Screen elements
Logging off
Printing features
Print job management
Print-to-Me screen
Print Jobs Details screen
Print Settings screen
Printing with Kofax Business Connect
Reconcile print transactions
Scanning features
Scan documents
Scan form fields
Scan Settings screen
Job tracking
Data collected in tracking
GDPR compliance tasks
Reference
Unified Client for Xerox application properties
Unified Client for Xerox device properties
Unified Client for Xerox Actions reference
Debugging tips
DWS debug logs
Device debug logs
Troubleshooting the Unified Client for Xerox
Error messages
Combined Clients Overview
Konica Minolta Combined Client
Implementation checklist
Requirements
Prepare the MFP to run the Kofax Combined Client for Konica Minolta
Configure Konica Minolta OpenAPI
Configure MFP Auto Reset Settings
Configure MFP for print release
Configuring a device to use the authentication application
Configure a device to use SSL for Web Services (OpenAPI)
Configure WebDAV to use SSL
Configure TCP Socket Setting to use SSL/TLS
Enable Web Browser
Check Authentication
Certificate validation
Configuring the Kofax Combined Client for Konica Minolta
Configure Equitrac
Server side configuration
Configure secure printing
Configure an embedded device
Configure authentication prompts
Configure printer driver
Configure device print tracking
Configure user authentication
Configure print authentication at the MFP
Configure billing codes for Combined Client for Konica Minolta devices
Configure a default billing code
Enforce color quotas
Receiving print error messages
Equitrac only deployment configuration
Copy Stop
Configure Output Manager
Output Manager authentication
Card reader authentication with Output Manager
Output Manager touchscreen authentication
Configure the client web server
Configure Output Manager devices
Configure device for accounting
Configure device for access control
Configure device for print preferences
Configure login methods
Configure billing accounts
Configure copy quotas
Configure an Output Manager destination
Accounting
Output Manager only deployment
Configure AutoStore
AutoStore authentication
AutoStore only deployment
Using the Kofax Combined Client for Konica Minolta
Combined Client for Konica Minolta login
Output Manager login
AutoStore login
Equitrac login
Switch between capture and print
Manage print jobs
Configure print settings
View Print Manager job information
Start an AutoStore workflow
Reference
Application settings
Device settings
Actions reference
Return codes
Restrictions and limitations
Troubleshooting
Ricoh Combined Client
Checklist: Combined Client for Ricoh Implementation
Requirements
Configuring the Kofax Combined Client for Ricoh
Configure Output Manager
Configure the SSL port
Configure Output Manager devices
Configure device for accounting
Configure device for access control
Configure device for print preferences
Configure sign-in methods
Configure billing accounts
Configure copy quotas
Accounting
Enable quota management
Configure AutoStore
Configure Equitrac
Server side configuration
Configure Secure Printing
Configure an embedded device
Configure authentication prompts
Configure billing codes for Combined Client for Ricoh devices
Configure a default billing code
Enforce color quotas
Receiving print error messages
Configure Combined Client for Ricoh device properties
Upload the Ricoh Combined Client Xlets to the server
Install the Combined Client for Ricoh
Modify the Ricoh Xlet
Install the SSO Xlet
Configure a device for external authentication
Turn off internal authentication
Turn on Enhanced External Charge Unit Management
Configure user access to device functions
Activate access control for internal authentication
Configure a device for internal authentication
Configure LDAP and user authentication at a device
Configure LDAP and user authentication
Internal authentication and Address Book
Configure authentication settings in Output Manager
Configure SNMPv3 settings
Single sign-on integration
Single sign-on integration
Single sign-on under internal authentication
Single sign-on under AAA
Single sign-on under CAP
Using the Kofax Combined Client for Ricoh
Combined Client for Ricoh login
Output Manager login
Login settings
User name and password entry
Card swipe
Manual ID entry
AutoStore login
Equitrac login
Screen layout
Print settings
Job information
View Print jobs
View Job information
Billing accounts
Logout
Reference
Application properties
Device properties
Files tab
Ricoh authentication modes
Action properties
Actions reference
Import guidelines
Combined Client for Ricoh return codes
Restrictions and limitations
Troubleshooting the Kofax Combined Client for Ricoh
Xerox EIP Connect
Device Setup and Configuration Prerequisites
Supported devices
Using the Xerox EIP Connect component
Configuring the Xerox EIP Connect Capture component
Configure Preferences settings
Enabling authentication for the component
Restrict access using Xerox Secure Access
Managing groups
Add a group
Edit a group
Remove a group
Enabling group level authentication
Adding a menu
Restrict access to a menu
Adding and editing forms
Adding a form
Edit a form
Restrict access to a form
Enable a dynamic form
Add fields to a form
Save a form as a template
Create a form from a template
Xerox EIP Connect settings
Groups tab
Group Settings dialog box
Menu Properties dialog box
Forms
Basic form
Checkbox field options
Date field options
Date
List field options
Lookup List field options
General SQL syntax
Numeric field options
Text field options
Tree field options
Add/Edit Tree Item dialog box
Send to DocuShare form
Send to Email form
Send to Folder form
Send to SharePoint form
Save Form as Template dialog box
Preferences tab
Advanced Server Settings dialog box
New Self Signed Certificate dialog box
Authentication tab
Authentication Prompts dialog box
LDAP Lookup Settings dialog box
Device Registration tab
Component RRTs
Troubleshooting tips
Restrictions and limitations
AutoStore Clients Overview
Fuji Xerox AIP
Overview
Prerequisites: Device setup and configuration
Supported devices
Using the Fuji Xerox AIP component
Configuring the Fuji Xerox AIP capture component
Configure Preferences settings
Register devices
Enable authentication for the component
Restrict access using the Fuji Xerox Authentication Agent
Managing groups
Add a group
Edit a group
Remove a group
Enable group-level authentication
Add a menu
Restrict access to a menu
Adding and Editing Forms
Add a form
Edit a form
Restrict access to a form
Enable a dynamic form
Add fields to a form
Save a form as a template
Create a form from a template
Configuring the component
Groups tab
Group Settings dialog box
Menu Properties dialog box
Forms
Basic form
Checkbox field options
Date field options
Date formats
List field options
Lookup List field options
General SQL syntax
Numeric field options
Text field options
Tree field options
Add/Edit Tree Item dialog box
Send to DocuShare form options
Send to Email form
Send to Folder form options
Send to SharePoint form options
Save Form as Template dialog box
Preferences tab
Advanced Server Settings dialog box
New Self Signed Certificate dialog box
Authentication tab
Authentication Prompts dialog box
LDAP Lookup Settings dialog box
Device Registration tab
Add/Edit Device Group dialog box
Add/Edit Device dialog box
Fuji Xerox AIP component RRTs
Migrate configuration
Restrictions and limitations
Troubleshooting Tips
Fujifilm AIP
Overview
Prerequisites: Device setup and configuration
Supported devices
Using the Fujifilm AIP component
Configuring the Fujifilm AIP capture component
Configure Preferences settings
Register devices
Enable authentication for the component
Restrict access using the Fujifilm Authentication Agent
Managing groups
Add a group
Edit a group
Remove a group
Enable group-level authentication
Add a menu
Restrict access to a menu
Adding and Editing Forms
Add a form
Edit a form
Restrict access to a form
Enable a dynamic form
Add fields to a form
Save a form as a template
Create a form from a template
Configuring the component
Groups tab
Group Settings dialog box
Menu Properties dialog box
Forms
Basic form
Checkbox field options
Date field options
Date formats
List field options
Lookup List field options
General SQL syntax
Numeric field options
Text field options
Tree field options
Add/Edit Tree Item dialog box
Send to DocuShare form options
Send to Email form
Send to Folder form options
Send to SharePoint form options
Save Form as Template dialog box
Preferences tab
Advanced Server Settings dialog box
New Self Signed Certificate dialog box
Authentication tab
Authentication Prompts dialog box
LDAP Lookup Settings dialog box
Device Registration tab
Add/Edit Device Group dialog box
Add/Edit Device dialog box
Fujifilm AIP component RRTs
Migrate configuration
Restrictions and limitations
Troubleshooting Tips
HP OXPd
Overview
Supported devices
Firmware requirements
Using the HP OXPd component
Use the HP OXPd component
Hosting the component in IIS
Configuring roles and features
Verifying the ASP.NET 4.0 configuration
Configuring access to the application pool identity
Creating the IIS web application
Enabling authentication
Validating the IIS web application
Disabling the component web server
Configuring the component for IIS
Enabling HP OXPd 1.6 on Oz devices
Configuring the HP OXPd component
General tab
Group options
Application options
Menu options
Form options
Label Field Options
List Field Options
Numeric Field Options
Text Field Options
Shared form options
Preferences tab
Device Manager options
Configure language settings for an HP OXPd device
Manage certificates
RRT Format tab
Authentication tab
Using SSL with Active Directory Application Mode
Obtaining a Certificate on a Windows 2003 Server
Using the Certificate with the ADAM Service
Verifying that SSL is Working with ADAM
HP OXPd component RRTs
Deploying top-level buttons to MFP devices
Deploy top-level buttons with Device Manager
Deploy top-level buttons with HP Web Jetadmin
Migrate configuration
Troubleshooting tips
Kyocera MFP (HyPAS)
Overview
Using the Kyocera MFP (HyPAS) component
Kyocera MFP (HyPAS) Component configuration
Groups tab
Groups
Menus
Forms
Basic form
PDF Encryption Settings dialog box
Send to Folder form
Email form
Send to SharePoint form
Form templates
Field types
Checkbox field options
Date/time field options
List field options
Numeric field options
Text field options
Tree field options
Preferences tab
Authentication tab
LDAP Lookup Settings dialog box
Kyocera MFP (HyPAS) component RRTs
Setting the component log level
Device setup and configuration
Install the KYOcapture MFP application
License the KYOcapture application
Configure the KYOcapture application for the first time
Change a configuration
Scan a document from a device
Supported devices
Lexmark MFP
Overview
Getting started
Supported devices
Device Deployment Utility tool
Installing and configuring the Lexmark Client software
Install the Lexmark client software
Configure the Lexmark client to use the AutoStore server
Determine the host name or IP address of the AutoStore server
Assign a solution ID to the AutoStore client (eSF 1.2-eSF 4.0)
Configure authentication on the Lexmark MFP (eSF 2.0-eSF 4.0)
Configure authorization on the Lexmark MFP (eSF 6.0, 7.0, and 9.0)
Test the AutoStore client with the Lexmark MFP device
Export settings configuration files
AutoStore settings for the Lexmark MFP
General tab
Group Settings dialog box
Menu Settings dialog box
Form Settings dialog box
General tab
Fields tab
Text Field Properties dialog box
Integer Field Properties dialog box
Numeric Field Properties dialog box
List Field Property dialog box
Tree Field Properties dialog box
Components tab
Appearance tab
Form List dialog box
Preferences tab
RRT's Format tab
Custom date-time format strings
Authentication (eSF 2.0, 3.0, 4.0, 6.0, 7.0, and 9.0) tab
Obtain an SSL certificate
LDAP Lookup Settings dialog box
Lexmark MFP component RRTs
Equitrac Clients Overview
Canon MEAP Embedded Client
Supported MFPs
USB Availability
Installation Overview
Pre-installation
Additional Documentation
Prerequisites
Pre-Installation Workflow
Planning the Deployment
Licensing the Embedded Application
Downloading the Embedded Application
Embedded Application Installation
Machine status during installation
Installing the Embedded Application
Verifying the Installation
Uninstalling an Existing Installation
Server-Side Configuration
Configuring the Embedded Device
Configure Embedded Device Settings
Configure authentication prompts
Configuring Follow-You Printing
Enabling Release Keys
User Workflows
Using the Card Reader
Logging in with a Magnetic Stripe Card
Logging in with a Proximity Card
Logging with Campus Card
Card Reader Status Messages
Registering Swipe Cards
Using the MFP Device
Using Follow-You Printing
Setting Print Options
Setting Temporary Default Print Options
Using Multi-Server Follow-You Printing
Accessing the Device Functions
Administrator Reference Material
Canon System Manager
Offline Mode and the Administrator
Administrator Tracking and Validation
Normal Users and Departmental Management
Transactions, Power Failure and Offline
Behavioral Changes
Configure the Equitrac Application
Log Files
Obtaining Equitrac Embedded Installer Log Files
Obtaining Device Application Logs from the Server
Obtaining Device Application Logs from the Device
Troubleshooting
Glossary
Fuji Xerox ECSP Embedded Client
About user authentication
Xerox ECSP Features
Installation and configuration requirements
Server and MFP requirements
System requirements
Supported MFPs
Magstripe device reader
Proximity cards
List of terms
MFP configuration
ApeosPort multifunction devices
Lock the device services
Configure MFP properties
Server-side configuration
Configure secure printing
Configure authentication prompts
Set Fuji Xerox API authentication prompts
Enable release keys
Configure billing code popup behavior
Configure a default billing code
Configure embedded devices
Configure eCopy embedded client
Configure workflows
Print tracking configuration
Track printing through printer ports
Track printing using Fuji Xerox Network Accounting
Disable Equitrac print tracking
Track color copies and prints using Xerox tiered billing
Enforce color quotas
Enable escrow for print and copy
Print error messages
Reconcile print transactions
Configure SNMP communication
Add a customized logo
Equitrac USB Card Reader plugin
Install Equitrac USB Card Reader plugin
Configure Equitrac USB Card Reader plugin
User workflows
Authenticate with a magnetic stripe card
Authenticate with a proximity card
Card Reader status messages
Set up EPA card readers
Set up USB card readers
Logging in to a user session
Equitrac Server authentication
Selecting functions
Using Follow-You Printing
Scanning
Terminology
Workflow overview
Scan workflows
Use LDAP email search
Adjust the scan settings
Delivery formats
Scan image orientation
Fuji Xerox EIP Embedded Client
About user authentication
About Secure Document Release
Supported MFPs and card readers
Magstripe device reader
Proximity cards
System requirements
Installation and configuration requirements
List of terms
Server and MFP configuration
Create and configure embedded devices
Configuring print tracking
Track printing through Equitrac ports
Track printing through the MFP Accounting log
Set the authentication prompts
Configure Follow-You Printing
Configure authentication prompts
Enable release key prompt
Configure billing code popup behavior
Enable Release All
Add Follow-You Printing to the Service screen for ApeosPort-I, II, and III devices
Add Follow-You Printing to the Service screen for ApeosPort-IV devices
Add Release All to the MFP Service screen
Enable the Billing Code application
Enable soft Logout for Billing Code application
Configure SDR through a web interface
Configure ApeosPort-I, II, and III devices
Configure ApeosPort-IV devices
User workflows
Authenticate with a magnetic stripe card
Authenticating with a proximity or smart card
Card reader status messages
Set a realm after restarting a device
Register swipe cards
Billing codes and job release
Using Follow-You Printing
Use Follow-You Printing with ApeosPort-I, II and III devices
Use Follow-You Printing with ApeosPort-IV devices
Use Release All
Copy enforcement and configuration
Color quota enforcement
Fujifilm ECSP Embedded Client
About user authentication
Fujifilm ECSP features
Installation and configuration requirements
Server and MFP requirements
System requirements
Supported MFPs
Magstripe device reader
Proximity cards
List of terms
MFP configuration
ApeosPort multifunction devices
Lock the device services
Configure MFP properties
Server-side configuration
Configure secure printing
Configure authentication prompts
Set Fujifilm API authentication prompts
Enable release keys
Configure billing code popup behavior
Configure a default billing code
Configure embedded devices
Configure eCopy embedded client
Configure workflows
Print tracking configuration
Track printing through printer ports
Track printing using Fujifilm Network Accounting
Disable Equitrac print tracking
Track color copies and prints using Fujifilm tiered billing
Enforce color quotas
Enable escrow for print and copy
Print error messages
Reconcile print transactions
Configure SNMP communication
Add a customized logo
Equitrac USB Card Reader plugin
Install Equitrac USB Card Reader plugin
Configure Equitrac USB Card Reader plugin
User workflows
Authenticate with a magnetic stripe card
Authenticate with a proximity card
Card Reader status messages
Set up EPA card readers
Set up USB card readers
Logging in to a user session
Equitrac Server authentication
Selecting functions
Using Print-to-Me
Scanning
Terminology
Workflow overview
Scan workflows
Use LDAP email search
Adjust the scan settings
Delivery formats
Scan image orientation
HP OXP Embedded Client
Requirements
Supported MFPs and Card Readers
List of Terms
Installation
Prerequisites: Before You Install
Installation Workflow
Download the Equitrac Embedded Software
Equitrac Partners
Equitrac Customers
Download the HP Web Jetadmin Software
Configuring Administrator Credentials
Configuring HTTP Settings
Remove URL Registration
Configuring Device Access Control
Installing the Embedded Solution
Single Device Install
Bulk Device Install Using Web Jetadmin
Installing the Embedded HP OXP Solution
Confirming the Installation
Uninstalling the Embedded Solution
Server-Side Configuration
Configuring Embedded Devices
Automatically Create Embedded Devices
Manually Configure Embedded Devices
Configuring Follow-You Printing
Configuring Authentication Prompts
User Workflows
Logging in with a Magnetic Stripe Card
Logging in with a Proximity Card
Card Reader Status Messages
Kyocera Embedded Client
About user authentication
About Secure Document Release
Supported MFPs and card readers
Magstripe device reader
Proximity cards
System requirements
Installation and configuration requirements
List of terms
Server and MFP configuration
Install the embedded application
Create and configure embedded devices
Automatically create embedded devices
Manually configure embedded devices
Configure authentication prompts
Configure billing code popup behavior
Enable release key prompt
Configure Follow-You Printing
Copy enforcement and configuration
Color quota enforcement
Configure the MFP through a web interface
Add Kyocera controller
User workflows
Authenticate with a magnetic stripe card
Authenticating with a proximity or smart card
Card reader status messages
Register swipe cards
Billing codes and job release
Use Follow-You Printing with Kyocera devices
Lexmark Embedded Client
Supported MFPs
Single Sign-on with AutoStore
Installation Overview
Scope
Device Deployment Utility Tool
Strategy
Pre-installation
Additional Documentation
Prerequisites
Pre-Installation Workflow
Planning the deployment
Downloading the Embedded Application
Server-Side Configuration
Configure the Embedded Device
Configure Embedded Device Settings
Configure Follow-You Printing
Enabling Release Keys
Configure authentication prompts
Embedded Application Installation
Export Security Templates (eSF 2.x-eSF 4.x devices)
Installation Overview
Installation with Equitrac Only
Installation with Equitrac and AutoStore
Update configured MFP devices
Machine status during installation
Verifying the installation
User Workflows
Using the Card Reader
Logging in with a Magnetic Stripe Card
Logging in with a Proximity Card
Logging with Campus Card
Card Reader Status Messages
Registering Swipe Cards
Using the MFP Device
Using Follow-You Printing
Printing from the USB Port
Change the MFP Logout Timer
Administrator Reference Material
Security
Offline Mode and the Administrator
Administrator Tracking and Validation
Workflows
Authentication
Function Select
Billing Code (tracked workflows only)
Function Execute
Transactions, Power Failure and Offline
Transaction Blockage
USB Card Reader Support
Configure the Equitrac Application
Additional Group Permissions (eSF 6.x devices)
Manually Adding Security Templates
Administration Security
Log Files
Obtaining Lexmark Embedded Solution Diagnostic Logs from the Device
Enabling and Disabling Lexmark Embedded Solution Diagnostic Logging
Capturing Lexmark Embedded Solution Diagnostic Logs
Obtaining Device Application Logs from the Device
Computer Setup and Installation
Login Configuration Web Page
Running the Console
Troubleshooting
Device Configuration
Slow Device Response or Local Mode Switching
Embedded Device Not Associated with Physical Device in Web System Manager
Incorrect IP Address Displayed
Eco-Mode Defeats Print Settings for Duplexing
PictBridge Printing
Transactions
USB Card Readers do Not Operate when the Device Wakes
Scan Center – Send me a Copy Option Does Not Show Email Address
Scan tracking and Follow-You Printing
Appendix A: Uninstallation
Appendix B: Third-party software licenses
Glossary
Sharp-OSA Embedded Client
Requirements
Supported MFPs and Card Readers
List of Terms
MFP and Server Configuration
Configuring the Application on the Server
Creating and Configuring Embedded Devices
Automatically Create Embedded Devices
Manually Configure Embedded Devices
Configuring a Specific Device
Billing code behavior
Configuring Print Tracking
Print Tracking Through Equitrac Ports
Print Tracking Through the MFP Accounting Log
Configuring Follow-You Printing
Enabling Release Keys
Configuring Authentication Prompts
Preparing to Configure Sharp MFPs
Preparing to Configure the Embedded Application via a Web Interface
Configuring the Application on Sharp OSA3.5 and OSA4 MFPs
Configure the Follow-You Printing Application
Set up a card reader
User Workflows
Using Sharp OSA3.5 and OSA4 MFPs
Using Follow-You Printing on OSA3.5 and OSA4 MFPs
Xerox ECSP Embedded Client
About user authentication
Xerox ECSP features
Installation and configuration requirements
Server and MFP requirements
System requirements
Supported MFPs
Magstripe device reader
Proximity Cards
List of terms
MFP configuration
Configure MFP properties
Configure the AltaLink series
Configure the PrimeLink series
Configure the VersaLink series
Configure the WorkCentre 4265
WorkCentre 57xx series
Locate Custom Services
Configure on the MFP console
Configure from the Internet Services Interface
WorkCentre 75xx series
Locate Custom Services
Configure on the MFP console
Configure from the Internet Services Interface
Set the default landing page
ConnectKey enabled MFPs
Locate Custom Services
Configure on the MFP console
Configure from the Internet Services Interface
Set the default landing page
ColorQube 92xx series
Locate Custom Services
Configure on the MFP console
Configure from the Internet Services Interface
Server-side configuration
Configure secure printing
Configure authentication prompts
Set Xerox Convenience Authentication prompts
Enable release keys
Configure billing code popup behavior
Configure embedded devices
Configure workflows
Print tracking configuration
Track print through printer ports
Track print using Xerox Network Accounting
Disable Equitrac print tracking
Track color prints or copies using Xerox tiered billing
Enable escrow for print and copy
Receive print error messages
Reconcile print transactions
Add Workflows to the Xerox All Services screen
Configure SNMP Communication
Add a customized logo
User workflows
Authenticate with a magnetic stripe card
Authenticate with a proximity card
Card reader status messages
Logging in to a user session
Authenticate through the Equitrac Server
Selecting functions
Using Follow-You Printing
Scanning
Terminology
Scan workflow overview
Scan workflows
Use LDAP Email Search
Adjusting the Scan Settings
Delivery formats
Scan image orientation
Xerox EIP Embedded Client
About user authentication
About secure document release
Installation and configuration requirements
System requirements
Supported MFPs
Magstripe device reader
Proximity cards
List of terms
MFP configuration
Configure MFP properties
Configure the WorkCentre 3315 and 3325 series
Configure WorkCentre 3615 and 6605
Configure WorkCentre 4265
Configure WorkCentre 52xx, 7232/7242, 73xx, and 74xx series
WorkCentre 56xx series
Locate custom services
Configure the WorkCentre 56xx series on the MFP console
Configure the WorkCentre 56xx series through the Internet Services Interface
WorkCentre 75xx series
Locate custom services
Configure WorkCentre 75xx on the MFP console
Configure WorkCentre 75xx through the Internet Services Interface
WorkCentre 76xx series
Locate custom services
Configure WorkCentre 76xx on the MFP console
Configure WorkCentre 76xx through the Internet Services Interface
WorkCentre 77xx series and ColorQube 93xx, 92xx or 89xx series
Locate custom services
Configure WorkCentre 77xx on the MFP console
Configure WorkCentre 77xx through the Internet Services Interface
WorkCentre Pro 2xx series
Locate custom services
Configure WorkCentre Pro 2xx on the MFP console
Configure WorkCentre Pro 2xx through the Internet Services Interface
Phaser 3635
Configure Phaser 3635 through the Internet Services Interface
Configure Phaser MFP
Configure other settings
Smart card configuration
Configure smart card software on the MFP Console
Configure smart card software through the Internet Services Interface
Configure domain controller settings
Set the inactive time limit
Server-side configuration
Configure authentication prompts
Set Xerox Secure Access Prompts
Set Xerox JBA prompts
Enable release key prompt
Configure billing code popup behavior
Configure embedded devices
Print tracking configuration
Track printing through printer ports
Track printing using Xerox Network Accounting
Track color copies and prints using Xerox Tiered Billing
Receiving print error messages
Configure SNMP communication
User workflows
Authenticate with a magnetic stripe card
Authenticate with a proximity or smart card
Card reader status messages
Log in to a user session
Use Follow-You Printing
Xerox EPA-EIP Embedded Client
About User Authentication
About Secure Document Release
Installation and Configuration Requirements
System Requirements
List of Terms
Supported MFPs
Magstripe Device Reader
Proximity Cards
Server and MFP Configuration
Configuring Embedded Devices
Configuring SecureAccess Device Prompts
Configuring Print Tracking
Print Tracking Through Equitrac Ports
Print Tracking Through the MFP Accounting Log
Configuring Follow-You Printing
Configuring Authentication Prompts
Configuring the MFP for Card Reader Support
Registering the EIP Applet
Configuring the MFP Through a Web Interface
Enable Custom Services
Set the Authentication System
Set Authentication Configuration Options
Configuring Smart Card Through Xerox® Authentication
Refreshing a Domain After Restarting a Device
Receiving Print Error Messages
User Workflows
Authenticating with a Magnetic Stripe Card
Authenticating with a Proximity Card
Card Reader Status Messages
Swipe Card Self-Registration
Using Follow-You Printing
Copy Enforcement and Configuration
Device Registration Service
Open the DRS web client
Working with Applications
Add an Application profile
Edit Application profile settings
Working with Devices
Add a new Device profile
Edit a Device
Changing languages on Device
Change language on eBN Device
Change language on eBX Device
Filter Device and group information
Import Device information
Export Device information
Device status
Working with Device Groups
Add a Device group
Add an existing Device to a Device group
Add a new Device profile to a Device group
Working with client packages
Files list (Unified Client installation packages)
Upload a Unified or Combined Client installation package to DRS
Remove a package file from DRS
Rename a package file in DRS
Performing Actions on Devices
Perform Device Actions
View Action history
Use multiple DRS instances with one database
Manage the DRS service on the server
Troubleshooting the DRS
Service verification
Device Web Server
View the DWS Web administration page
Purge DWS logs
Generate a CA Certificate using an IP address
Regenerate certificates
DWS failover
DWS failover scenarios
›
ControlSuite Clients
›
Unified Clients Overview
›
Kofax Unified Clients for Ricoh
›
Kofax Ricoh PCC for Equitrac and AutoStore
›
Reference
Reference
This section describes how to configure a Ricoh PCC device.
×