Configure Robot
A Robot is configured using the properties described below. The
Robot Configuration window appears when you click
Configure Robot
on the toolbar, or press Ctrl+R. You can also select
Configure Robot from the
File menu.
Basic Tab
- Robot Comment
-
Enter a comment about a Robot.
- Robot Thumbnail
-
Add an image for a Robot.
-
Click Load and go to the folder where the required file is located. The preferred image type is PNG. When you upload an image, it is automatically scaled to 20x20 pixels. Open the file, click OK, and save the Robot.
If you try to upload a file of different type, an error message appears.
To delete an image, open the Robot Configuration window and double-click the asterisk near the Robot thumbnail. The Robot thumbnail is now set as the default, and the preview window contains "No image" text.
Click OK and save the Robot.
- Robot Tags
-
Create one or more tags for a Robot. The tags are displayed in the Tags column on the page in Management Console. You can use the tags to filter the list of robots in the Management Console. Tags can contain letters, numbers, and underscore. You can use 255 characters in tags. If you type more than that number, only the first 255 of them are saved. If you enter two identical tags, a red warning icon appears.
- Human Processing Time
-
This option helps you specify the time in minutes required for a person to perform the same task that the selected Robot performs during its run. The difference between the specified value and the actual Robot run time is displayed in the "Manual processing time saved" table of the Overview report in Kofax Analytics for RPA.
Version
Shows the version of the saved Robot and the version of the Design Studio the Robot was last edited in.