› KCM Core Developer's Guide › Security issues › Adjust internal interface settings

Adjust internal interface settings

The internal interface is used by KCM Document Processor Manager to communicate with KCM Document Processors in the KCM Core setup. This is a TCP/IP interface, which can use similar security settings to the external interface.

By default, the security is set to public. If all of the KCM Core setups run on one machine, you might consider changing the security setting to local. When the servers running KCM Document Processors are known, you can set an access list. To adjust the settings, follow these steps.

  1. Start KCM Core Administrator.
  2. In the tree view, click the Servers node.
  3. On the Security tab, make a selection under Security.

    • To restrict access to the local host, select Access is restricted to the local host.

    • To set an access list for particular machines, select Network access list and specify the IP numbers.

      Example 10.0.0.0/24

      This setting grants access to all IP numbers in the range from 10.0.0.0 to 10.0.0.255.

  4. To save and apply the changes, click Save & Apply.