Printix Go Lexmark supported printers and MFPs
Requirements
-
As a general rule, Printix Go supports Lexmark printers and MFPs that are compatible with Lexmark Embedded Solutions Framework (eSF) version 6.x.
-
Latest Lexmark printer firmware version.
-
See also: Lexmark documentation on: How to Check, Download, and Update with the Latest Lexmark Printer Firmware
-
-
Printer's date and time must match the local time.
-
Printer administrator password must be set and cannot be blank.
-
Printer's DNS server must be configured.
-
Computer with Printix Client must be online on the printer's network during installation and use of Printix Go.
-
In addition to the required Internet endpoints, these must also be unblocked to allow Printix Go to communication to Printix Cloud (how to test):
-
https://device-api.printix.net
-
https://on-device-api.printix.net
-
https://on-device-printer-sign-in.printix.net
-
https://on-device-printer-release-documents.printix.net
-
https://on-device-capture.printix.net
-
Next steps
- Verify that your printer is supported.
- Prepare Lexmark printer for Printix Go.
- Install Printix Go.
DISCLAIMER
We make all attempts to keep the product compatibility information current. However, we make no warranties, express or implied, with respect to printer vendor's products or the interoperation with Printix Go.
Printers are supported even if the actual model name as shown in Printix Administrator and as product name on printer's configuration and web (EWS) pages differ from below. Example: Lexmark CX622ade is the model name reported by the printer, but in the list below, you will see CX622. If in doubt, search for the number in the name (CX622).
MFPs
-
CX522
-
CX532
-
CX622, CX625
-
CX635
-
CX725
-
CX730, CX735
-
CX820, CX825
-
CX860
-
CX920, CX921, CX922, CX923, CX924, CX927
-
CX930, CX931, CX942, CX943, CX944
-
MX432
-
MX522
-
MX532
-
MX622
-
MX632
-
MX721, MX722
-
MX822, MX826
-
MX931
-
XC2235
-
XC4140, XC4143
-
XC4150, XC4153
-
XC4240
-
XC4342, XC4352
-
XC6152
-
XC8155
-
XC8160
-
XC9225, XC9235, XC9245, XC9255, XC9265
-
XC9325, XC9335, XC9445, XC9455, XC9465
-
XM1246
-
XM3142
-
XM3250
-
XM5365, XM5370
-
XM7355, XM7370
Printers
-
C2240
-
C4150
-
C4342, C4352
-
C6160
-
CS622
-
CS632
-
CS720, CS725, CS727, CS728
-
CS730, CS735, CS737
-
CS820, CS827
-
CS921, CS923, CS927
-
CS943
-
M3250
-
M5255, M5270
-
MS622
-
MS632
-
MS822, MS826
Supported card readers
Card readers with the below vendor ID (VID) and product ID (PID) are supported.
Vendor | VID | PID | Protocol | Comment | Lexmark1 |
---|---|---|---|---|---|
Baltech | 0×13AD | 0×9CAA | KBD | Kofax Equitrac (see part numbers) | Yes |
Baltech | 0×13AD | 0×9CA5 | Binary | Kofax Equitrac (see part numbers) | No |
Brother | - | - | - | Brother internal card reader | No |
Elatec | 0×09D8 | 0×0206 | Binary | TWN3 Mifare USB (Kofax SafeCom) | Yes |
Elatec | 0×09D8 | 0×0310 | KBD | TWN3 Mifare USB Keyboard emulating | Yes |
Elatec | 0×09D8 | 0×0406 | Binary | TWN4 Mifare USB (Kofax SafeCom) | Yes |
Elatec | 0×09D8 | 0×0410 | KBD | TWN4 Mifare USB | Yes |
Fujifilm | 0×076B | 0×5128 | KBD | Fujifilm ICCR-B | No |
HID | 0×076B | 0×5427 | Custom report | HID OMNIKEY 5427G2 | No |
HID | 0×076B | 0×5428 | KBD | HID OMNIKEY 5427G2 (keyboard) | No |
HP | 0×03F0 | 0×0045 | MFP24 | X3D03A HP USB Universal Card Reader | No |
HP | 0×0C27 | 0×3BFA | KBD | Y7C05A HIP2 Keystroke Reader | Yes |
Inepro | 0×1DA6 | 0×0110 | KBD |
Inepro SCR708.I RFID Reader Inepro SPIDER RFID Reader |
Yes |
rf IDEAS | 0×0C27 | 0×0104 | Binary | pcProx Card Reader (Kofax SafeCom) | Yes |
rf IDEAS | 0×0C27 | 0×3BFA | KBD | pcProx Card Reader | Yes2 |
rf IDEAS | 0×0C27 | 0×3BFA | KBD |
RDR-30MR1CKU-MXS RDR-800R1AKU RDR-80541AKU-RSOP RDR-805R1AKU RDR-805R1AKU-G3 |
No |
How to identify the eSF version
If the eSF version is 6 or higher:
- Open the printer's web page and sign in as administrator.
- Select Apps.
- Select App Framework Configuration.
- Look for Embedded Solutions and identify the Version.
How to identify an older eSF version
If the eSF version is earlier (not supported by Printix Go):
- Open the printer's web page and sign in as administrator.
- Select Reports.
- Select Device Settings (Menu Settings).
- Scroll down and look for Embedded Solutions and identify the Framework version.
Printix may have issues registering card readers if "Keyboard Emulation Reader Driver" is installed on the printer. Seen with Elatec (VID 0×09D8, PID 0×0410).
Not all Lexmark printers support this card reader.